Struct freya_elements :: elements :: rect Copy item path

impl rect

pub const padding: AttributeDescription = _

Specify the inner paddings of an element. You can do so by four different ways, just like in CSS.

§Example

fn app() -> Element {
    rsx!(
        rect {
            padding: "25", // 25 in all sides
            padding: "100 50", // 100 in top and bottom, and 50 in left and right
            padding: "2 15 25", // 2 in top, 15 in left and right, and 25 in bottom
            padding: "5 7 3 9" // 5 in top, 7 in right, 3 in bottom and 9 in left
        }
    )
}

pub const height: AttributeDescription = _

Specify the width and height for the given element.

See syntax in Size Units.

§Example

fn app() -> Element {
    rsx!(
        rect {
            background: "red",
            width: "15",
            height: "50",
        }
    )
}

pub const width: AttributeDescription = _

pub const min_height: AttributeDescription = _

§min_width & min_height

rect supports specifying a minimum width and height, this can be useful if you use it alongside a percentage for the target size.

See syntax for Size Units.

§Usage

fn app() -> Element {
    rsx!(
        rect {
            background: "red",
            min_width: "100",
            min_height: "100",
            width: "50%",
            height: "50%",
        }
    )
}

pub const min_width: AttributeDescription = _

pub const max_height: AttributeDescription = _

§max_width & max_height

rect supports specifying a maximum width and height.

See syntax for Size Units.

§Usage

fn app() -> Element {
    rsx!(
        rect {
            background: "red",
            max_width: "50%",
            max_height: "50%",
            width: "500",
            height: "500",
        }
    )
}

pub const max_width: AttributeDescription = _

pub const background: AttributeDescription = _

Specify a color as the background of an element.

You can learn about the syntax of this attribute in Color Syntax.

§Example

fn app() -> Element {
    rsx!(
        rect {
            background: "red"
        }
    )
}

pub const border: AttributeDescription = _

§border

You can add borders to an element using the border attribute.

border syntax: [width] [width?] [width?] [width?] <inner | outer | center> [fill].

1-4 width values should be provided with the border attribute. Widths will be applied to different sides of a rect depending on the number of values provided:

One value: all
Two values: vertical, horizontal
Three values: top horizontal bottom
Four values: top right bottom left

Border alignment determines how the border is positioned relative to the element’s edge. Alignment can be inner, outer, or center.

§Examples

A solid, black border with a width of 2 pixels on every side. Border is aligned to the inside of the rect’s edge.

fn app() -> Element {
    rsx!(
        rect {
            border: "2 inner black",
        }
    )
}

A solid, red border with different widths on each side. Border is aligned to the center of the rect’s edge.

fn app() -> Element {
    rsx!(
        rect {
            border: "1 2 3 4 center red",
        }
    )
}

Borders can take any valid fill type, including gradients.

fn app() -> Element {
    rsx!(
        rect {
            border: "1 inner linear-gradient(red, green, yellow 40%, blue)",
        }
    )
}

Similarly to the shadow attribute, multiple borders can be drawn on a single element when separated by a comma. Borders specified later in the list are drawn on top of previous ones.

fn app() -> Element {
    rsx!(
        rect {
            border: "6 outer red, 5 outer orange, 4 outer yellow, 3 outer green, 2 outer blue, 1 outer purple",
        }
    )
}

pub const direction: AttributeDescription = _

Control how the inner elements stack.

Accepted values:

vertical (default)
horizontal

§Usage

fn app() -> Element {
    rsx!(
        rect {
            width: "100%",
            height: "100%",
            direction: "vertical",
            rect {
                width: "100%",
                height: "50%",
                background: "red"
            },
            rect {
                width: "100%",
                height: "50%",
                background: "green"
            }
        }
    )
}

pub const shadow: AttributeDescription = _

Draw a shadow of the element.

Syntax: <x> <y> <intensity> <size> <color>

§Example

fn app() -> Element {
    rsx!(
        rect {
            shadow: "0 0 25 2 rgb(0, 0, 0, 120)"
        }
    )
}

pub const corner_radius: AttributeDescription = _

§corner_radius & corner_smoothing

The corner_radius attribute lets you smooth the corners of the element, with corner_smoothing you can give a “squircle” effect.

§Example

fn app() -> Element {
    rsx!(
        rect {
            corner_radius: "10",
            corner_smoothing: "75%"
        }
    )
}

pub const corner_smoothing: AttributeDescription = _

pub const color: AttributeDescription = _

The color attribute lets you specify the color of the text.

You can learn about the syntax of this attribute in Color Syntax.

§Example

fn app() -> Element {
    rsx!(
        label {
            color: "green",
            "Hello, World!"
        }
    )
}

Another example showing inheritance:

fn app() -> Element {
    rsx!(
        rect {
            color: "blue",
            label {
                "Hello, World!"
            }
        }
    )
}

pub const font_size: AttributeDescription = _

You can specify the size of the text using font_size.

§Example

fn app() -> Element {
    rsx!(
        label {
            font_size: "50",
            "Hellooooo!"
        }
    )
}

pub const font_family: AttributeDescription = _

With the font_family you can specify what font you want to use for the inner text.

Check out the custom font example to see how you can load your own fonts.

§Example

fn app() -> Element {
    rsx!(
        label {
            font_family: "Inter",
            "Hello, World!"
        }
    )
}

pub const font_style: AttributeDescription = _

You can choose a style for a text using the font_style attribute.

Accepted values:

upright (default)
italic
oblique

§Example

fn app() -> Element {
    rsx!(
        label {
            font_style: "italic",
            "Hello, italic World!"
        }
    )
}

You can also specify multiple fonts in order of priority, if one is not found it will fallback to the next one.

Example:

fn app() -> Element {
    rsx!(
        label {
            font_family: "DoesntExist Font, Impact",
            "Hello, World!"
        }
    )
}

pub const font_weight: AttributeDescription = _

You can choose a weight for text using the font_weight attribute.

Accepted values:

invisible
thin
extra-light
light
normal (default)
medium
semi-bold
bold
extra-bold
black
extra-black
50
100
200
300
400
500
600
700
800
900
950

§Example

fn app() -> Element {
    rsx!(
        label {
            font_weight: "bold",
            "Hello, bold World!"
        }
    )
}

pub const font_width: AttributeDescription = _

You can choose a width for a text using the font_width attribute.

⚠️ Only fonts with variable widths will be affected.

Accepted values:

ultra-condensed
extra-condensed
condensed
normal (default)
semi-expanded
expanded
extra-expanded
ultra-expanded

§Example

fn app() -> Element {
    rsx!(
        label {
            font_width: "ultra-expanded",
            "Hello, wide World!"
        }
    )
}

pub const main_align: AttributeDescription = _

§main_align & cross_align

Control how the inner elements are positioned inside the element. You can combine it with the direction attribute to create complex flows.

Accepted values for main_align:

start (default): At the begining of the axis
center: At the center of the axis
end: At the end of the axis
space-between(only for main_align): Distributed among the available space
space-around (only for main_align): Distributed among the available space with small margins in the sides
space-evenly (only for main_align): Distributed among the available space with the same size of margins in the sides and in between the elements.

Accepted values for cross_align:

start (default): At the begining of the axis (same as in main_align)
center: At the center of the axis (same as in main_align)
end: At the end of the axis (same as in main_align)

When using the vertical direction, main_align will be the Y axis and cross_align will be the X axis. But when using the horizontal direction, the main_align will be the X axis and the cross_align will be the Y axis.

Example on how to center the inner elements in both axis:

fn app() -> Element {
    rsx!(
        rect {
            width: "100%",
            height: "100%",
            main_align: "center",
            cross_align: "center",
            rect {
                width: "50%",
                height: "50%",
                background: "red"
            },
        }
    )
}

pub const cross_align: AttributeDescription = _

pub const text_align: AttributeDescription = _

You can change the alignment of the text using the text_align attribute.

Accepted values:

center
end
justify
left (default)
right
start

§Example

fn app() -> Element {
    rsx!(
        label {
            text_align: "right",
            "Hello, World!"
        }
    )
}

pub const rotate: AttributeDescription = _

The rotate attribute let’s you rotate an element.

Compatible elements: all except text.

§Example

fn app() -> Element {
    rsx!(
        label {
            rotate: "180deg",
            "Hello, World!"
        }
    )
}

pub const overflow: AttributeDescription = _

Specify how overflow should be handled.

Accepted values:

clip
none

§Example

fn app() -> Element {
    rsx!(
        rect {
            overflow: "clip",
            width: "100",
            height: "100%",
            rect {
                width: "500",
                height: "100%",
                background: "red",
            }
        }
    )
}

pub const margin: AttributeDescription = _

Specify the margin of an element. You can do so by four different ways, just like in CSS.

§Example

fn app() -> Element {
    rsx!(
        rect {
            margin: "25", // 25 in all sides
            margin: "100 50", // 100 in top and bottom, and 50 in left and right
            margin: "2 15 25", // 2 in top, 15 in left and right, and 25 in bottom
            margin: "5 7 3 9" // 5 in top, 7 in right, 3 in bottom and 9 in left
        }
    )
}

pub const position: AttributeDescription = _

Specify how you want the element to be positioned inside it’s parent area.

Accepted values:

stacked (default)
absolute

When using the absolute mode, you can also combine it with the following attributes:

position_top
position_right
position_bottom
position_left

These only support pixels.

§Example

fn app() -> Element {
    rsx!(
        rect {
            width: "100%",
            height: "100%",
            rect {
                position: "absolute",
                position_bottom: "15",
                position_right: "15",
                background: "black",
                width: "100",
                height: "100",
            }
        }
    )
}

pub const opacity: AttributeDescription = _

Specify the opacity of an element and all its descendants.

§Example

fn app() -> Element {
    rsx!(
        rect {
            opacity: "0.5", // 50% visible
            label {
                "I am fading!"
            }
        }
    )
}

pub const content: AttributeDescription = _

Specify how you want the automatic (e.g width: auto) bounds in the cross axis to be constrained for the inner elements.

Accepted values:

normal (default): Uses parent bounds.
fit: Uses parent bounds but later shrunks to the size of the biggest element inside.

The fit mode will allow the inner elements using width: fill-min to expand to the biggest element inside this element.

§Example

fn app() -> Element {
    rsx!(
        rect {
            content: "fit",
            height: "100%",
            rect {
                width: "fill-min", // Will have a width of 300px
                height: "25%",
                background: "red",
            }
            rect {
                width: "150",  // Will have a width of 150px
                height: "25%",
                background: "green",
            }
            rect {
                width: "fill-min",  // Will have a width of 300px
                height: "25%",
                background: "blue",
            }
            rect {
                width: "300",  // Biggest element, will have a width of 300px
                height: "25%",
                background: "black",
            }
        }
    )
}

pub const line_height: AttributeDescription = _

§line_height

Specify the height of the lines of the text.

§Example

fn app() -> Element {
    rsx!(
        label {
            line_height: "3",
            "Hello, World! \n Hello, again!"
        }
    )
}

pub const spacing: AttributeDescription = _

Specify a space between the inner elements. Think it as a margin for every element but defined by its parent. It only applies to the side of the direction.

§Example

fn app() -> Element {
    rsx!(
        rect {
            direction: "vertical",
            spacing: "20",
            // Not before
            rect {
                width: "100",
                height: "100",
                background: "red",
            }
            // There will be a space between these two elements of 20 pixels
            rect {
                width: "100",
                height: "100",
                background: "blue",
            }
            // Here as well
            rect {
                width: "100",
                height: "100",
                background: "green",
            }
            // But not after
        }
    )
}

pub const canvas_reference: AttributeDescription = _

pub const layer: AttributeDescription = _

pub const offset_y: AttributeDescription = _

pub const offset_x: AttributeDescription = _

pub const reference: AttributeDescription = _

pub const cursor_reference: AttributeDescription = _

pub const a11y_id: AttributeDescription = _

pub const a11y_focusable: AttributeDescription = _

pub const a11y_auto_focus: AttributeDescription = _

pub const a11y_name: AttributeDescription = _

pub const a11y_description: AttributeDescription = _

pub const a11y_value: AttributeDescription = _

pub const a11y_access_key: AttributeDescription = _

pub const a11y_author_id: AttributeDescription = _

pub const a11y_keyboard_shortcut: AttributeDescription = _

pub const a11y_language: AttributeDescription = _

pub const a11y_placeholder: AttributeDescription = _

pub const a11y_role_description: AttributeDescription = _

pub const a11y_state_description: AttributeDescription = _

pub const a11y_url: AttributeDescription = _

pub const a11y_row_index_text: AttributeDescription = _

pub const a11y_column_index_text: AttributeDescription = _

pub const a11y_scroll_x: AttributeDescription = _

pub const a11y_scroll_x_min: AttributeDescription = _

pub const a11y_scroll_x_max: AttributeDescription = _

pub const a11y_scroll_y: AttributeDescription = _

pub const a11y_scroll_y_min: AttributeDescription = _

pub const a11y_scroll_y_max: AttributeDescription = _

pub const a11y_numeric_value: AttributeDescription = _

pub const a11y_min_numeric_value: AttributeDescription = _

pub const a11y_max_numeric_value: AttributeDescription = _

pub const a11y_numeric_value_step: AttributeDescription = _

pub const a11y_numeric_value_jump: AttributeDescription = _

pub const a11y_row_count: AttributeDescription = _

pub const a11y_column_count: AttributeDescription = _

pub const a11y_row_index: AttributeDescription = _

pub const a11y_column_index: AttributeDescription = _

pub const a11y_row_span: AttributeDescription = _

pub const a11y_column_span: AttributeDescription = _

pub const a11y_level: AttributeDescription = _

pub const a11y_size_of_set: AttributeDescription = _

pub const a11y_position_in_set: AttributeDescription = _

pub const a11y_color_value: AttributeDescription = _

pub const a11y_expanded: AttributeDescription = _

pub const a11y_selected: AttributeDescription = _

pub const a11y_hovered: AttributeDescription = _

pub const a11y_hidden: AttributeDescription = _

pub const a11y_linked: AttributeDescription = _

pub const a11y_multiselectable: AttributeDescription = _

pub const a11y_required: AttributeDescription = _

pub const a11y_visited: AttributeDescription = _

pub const a11y_busy: AttributeDescription = _

pub const a11y_live_atomic: AttributeDescription = _

pub const a11y_modal: AttributeDescription = _

pub const a11y_touch_transparent: AttributeDescription = _

pub const a11y_read_only: AttributeDescription = _

pub const a11y_disabled: AttributeDescription = _

pub const a11y_is_spelling_error: AttributeDescription = _

pub const a11y_is_grammar_error: AttributeDescription = _

pub const a11y_is_search_match: AttributeDescription = _

pub const a11y_is_suggestion: AttributeDescription = _

pub const a11y_role: AttributeDescription = _

pub const a11y_invalid: AttributeDescription = _

pub const a11y_toggled: AttributeDescription = _

pub const a11y_live: AttributeDescription = _

pub const a11y_default_action_verb: AttributeDescription = _

pub const a11y_orientation: AttributeDescription = _

pub const a11y_sort_direction: AttributeDescription = _

pub const a11y_current: AttributeDescription = _

pub const a11y_auto_complete: AttributeDescription = _

pub const a11y_has_popup: AttributeDescription = _

pub const a11y_list_style: AttributeDescription = _

pub const a11y_vertical_offset: AttributeDescription = _

Auto Trait Implementations§

impl Freeze for rect

impl RefUnwindSafe for rect

impl Send for rect

impl Sync for rect

impl Unpin for rect

impl UnwindSafe for rect

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Downcast for T
where T: Any,

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.

impl<T> DowncastSync for T
where T: Any + Send + Sync,

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more